With feature: Sensor cable could be extended to 50 meters. 0-99%RH control. Super high accuracy. Modbus RS485. Additional outputs: two timers for outputs.With function: Heating / Cooling mode option. Humidifying / de-humidifying mode option.Temperature and humidity output delay protection. Hight / low temperature / humidity alarm.Sensor failure alarm and outputs protection.Calibration for temperature and humidity. Output R1: Could be energized when over hot and/or over wet. Could drive an exhausting fan, or an alarming indicator.Two timers:One timer output is R1, could drive an exhausting fan periodically.Another timer outputs R4 and R5 could drive such as incubator egg tray.R4 and R5 could be energized by keys, suitable for control the egg tray to any angle.Running status saving for supplyIt is suitable for: Incubator control Swallow, swiftlet humidity control Mushroom house control and so on. supply: 100 ~ 240Vac, 50/60HzAccuracy: Temperature: 1% / 25Humidity: 3% (with the sensor -SHr05J), 2% (with the sensor -SHr05P)Setting range: Temperature: 0.0 ~ 65.0Humidity: 0 ~ 80%RH (when U9 = 0 for -SHr05J), 0 ~ 99%RH (when U9 = 1 for -SHr05P)Display range: Temperature: -20. ~ 80.0, Humidity: 0 ~ 99%RHOutputs:Temperature control: R3 5AHumidity control: 3AMulti-function: R1 3ATimer outputs: R4 and R5 1AWorking environment: -10 ~ 45, no more than 85%RH, without dewCase dimension: W78 x H34.5 x D71 (mm)Installation drilling: W71 x H29 (mm)Protection level: IP65 (Front side only)Colour: Blackmaterial: plasticPackage Contents:1 x Temperature Controller1 x sensorOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.