Welcome to our shop! This Voltage Signal Generator is a versatile product that can output 0-10V voltage. It can work independently or be used with PLCs, industrial control boards, motion control cards, and industrial control controllers, making it highly compatible. The generator comes with a fully enclosed enclosure, providing strong protection. The mounting and fixing method follows the standard industry 5135. The wiring uses 5.08mm 4-bit terminal blocks, making it easy to wire and maintain. It features automatic range intelligent switching display, with 2 digits after the decimal point below 10V and 1 digit after the decimal point above 10V. This Voltage Signal Generator operates with a default input voltage of DC15-30V. It has a minimum standby current of 40mA/24V and a maximum allowable working current of 200mA/24V. The maximum allowable surge peak current is 1A, and the allowable input power ripple is ≤500mV. The analog signal output voltage accuracy is ±1%, and the load capacity is ≤50mA. It has short-circuit protection with a maximum allowable time of ≤3 seconds and automatic recovery. The analog signal output voltage ripple is ≤30mV. This generator is cooled by natural cooling and has a normal working temperature that does not exceed 65 degrees Celsius. It should not be placed next to other heating equipment and should be protected from dust, oil mist, corrosive gases, excessive humidity, and strong vibrations. It should not be exposed to flammable gas, conductive dust, or liquid. The working temperature ranges from -15 to +45℃, operating humidity ranges from 40% to 90%, and permissible vibration is less than 10-55HZ/0.15MM. The storage temperature ranges from -20 to +65℃, and it has no requirements for space interference radio waves. We strive for 100% satisfaction and prioritize our customers. If you encounter any product problems such as damage or incorrect quantity upon receiving the goods, please contact the seller immediately. We are committed to providing satisfactory after-sales service.