Crawler Esc Programing Programed Led 45a 60a 80a Brushed Esc For Rc 1/10 Car Esc Electro

1. Initial Force:5%,13%,21%,29%(default value 5%).2. Low Voltage Cut-Off:The function is mainly to prevent the lithium battery pack from over discharging. When using lithium battery pack, set the suitable value for low-voltage protection as your like. WARNING: Never use the default value "Non-protection" for lithium battery 3.1V,3.3V,2.9V(default value 3.1V).3. Initial Drag Brake Force:100%,90%,80%,70%(default value 100%).4. Maximum Reverse Force: 100%,75%,50%(default value 95%).5. 3 Modes (Also called "Punch") from "soft"to " aggressive" (default value Medium).Programme card : 1. Connect BEC wires with the card then turn on the ESC.2. The Blue LED flashes for 2 then LED off, that is, the connecting card with ESC is successful, and the Red LED on presents the current value of that item. Otherwise, the connecting is failed.3. press the Key"" to select different programs.4. press the Key"" to select different value of the current .5. press the Key "" to confirm above selections, the Blue LED on immediately and has gone out within 5 seconds, that is, this process is successful.6. press the Key"Reset" to reset the setting.Brand Name: HOBBYTool Supplies: Assembled classRC Parts & Accs: MotorsUse: Vehicles & Remote Control ToysTechnical parameters: Value 2Model Number: LED Programing CardRemote Control Peripherals/Devices: ESCFor Vehicle Type: Four-wheel Drive : MotorsWeight:19g/0.67ozSize:60 x 50 x 8mm/2.36 x 1.97 x 0.31inchcolor:BlackMaterial:composite materialPackage Contents:1 x Programming CardOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.