FrSky 2,4Ghz Telemetry TX module with LCD display, ACCST

R949.00 2 items in stock
  • Product reference: 4163772-9561428
  • Plane icon Dispatched within 24 hours
  • Shipping from Finland
  • Delivery cost to South Africa R128.31

1. Introduction 1.1 Compatibility Mode of DHT-U Compatibility V8 _Mode Non-telemetry receivers (V8FR-HV, V8R7-HV, V8R7-SP, V8R4) D_Mode Telemetry receivers (D8R, D8RSP, D6FR, D4FR)   1.2 Specification Operating Voltage Range: 6.0V-13.0V Operating Current: 50mA Output Power: 60mW Resolution: 3072 (>11bit) 1.3 Features 1) All-in-one combination of telemetry module,in-built display and alarm threshold settings 2) DHT-U can be clamped to the transmitter handle/antenna 3) Show in-flight data via in-built display 4) Capable of setting failsafe during flight 5) Firmware upgradable   2 Screen structures 2.1 Main Screen FrSky Logo Data Screen            Menu Screen Module ID             Version Number 2.2 Data Screen FrSky sensor hub, sensors and D8R telemetry receiver are required if information collecting and processing, model monitoring and data feedback are required. 2.2.1 Data Screen 1 GMT (H/M/S)           Fuel Level Voltage A1                 Voltage A2 RSSI   2.2.2 Data Screen 2 GMT (H/M/S) Acceleration X/Y/Z Speed       RPM       Altitude Note: Press Button “R” to change between absolute altitude and relative altitude.   2.2.3 Data Screen 3 GMT (H/M/S) Temperature1            Temperature2 Longitude                   Latitude   2.3 Menu Screen 2.3.1 Menu Screen 1 V8_Mode/D_Mode            Bind/Normal/Range Check Setting                                 Failsafe Note: When V8_Mode is selected, users will have no access to Setting page or Failsafe page.   2.3.2 Menu Screen 2 A1/A2 Voltage Division Ratio: make sure they are programmed in accordance with those of connected voltage sensors Unit Set (selectable): Speed (m/s or MPH) Temperature (Celsius or Fahrenheit) Alarm Set: A1_1/2, A2_1/2, RSSI_1/2 Below are FrSky default values for RSSI, users can change according to their requirements:   Alarm Than Value RSSI 1 < 45 2 < 42   2.3.3 Menu Screen 3 Press button B to set failsafe during flight, or others to skip.   3 Set Up 3.1 Installation Process 1) Open the transmitter and find out the battery power supply line, GND and PPM signal line. 2) Solder the battery power supply line, GND and PPM signal line to corresponding wires of DHT-U (RED→V+; BLACK→GND; BROWN→PPM). 3) Clamp DHT-U to the transmitter’s handle or antenna base by provided clamp and screw. 4) Connect the module antenna to DHT-U.   3.2 Bind Procedure 1) Ascertain that the transmitter is in PPM mode. Turn the transmitter off. 2) Turn the transmitter on and enter MENU page, select V8_Mode or D_Mode to work with corresponding receiver you are using (see compatibility chart above). Select Bind. 3) Connect battery to the receiver while holding F/S button on the receiver. The RED LED on the receiver will flash, indicating the binding process is completed. Turn off the transmitter and receiver. 4) Turn the transmitter on and enter MENU page, select Normal. Re-connect battery to the receiver. The RED SOLID LED on the receiver will indicate receiver is receiving commands from the transmitter. After above steps are completed, both the transmitter and receiver are ready to be used. The bind procedure will not have to be repeated unless one of the two is replaced.   3.3 Range Check A pre-flight range check should be done before each flying session. Reflections from nearby metal fences, concrete buildings or trees can cause loss of signal both during the range check and during flight. The following steps are to be followed to perform the range check of the model before flight: 1) Place the model at least 60cm (two feet) above non-metal contaminated ground (e.g. on a wooden bench). 2) The receiver’s antennas should be separated in the model and not touch the ground. Place the module antenna in a vertical position. 3) Turn the transmitter on and enter MENU page, select R-CK, connect battery to the receiver. The effective distance will be decreased to 1/30 of full range. 4) Walk away from the model while simultaneously operating the controls on the transmitter, confirming that all controls operate normally to a distance of 1/30 of the full range. 3.4 Signal Loss Indicator and Failsafe Setting In some special circumstances, such as strong interference, the signal may be lost. When signal is lost in a short period, the receiver continues to try to search for the transmitter, at the same time it keeps the last command from the transmitter, until a new command is received. Failsafe is a useful feature in which all controls move to a preset position whenever the control signal is lost for a period of time. Follow the steps below to set failsafe before flight: 1) Bind the receiver first and turn on both transmitter and receiver; 2) Set all transmitter controls to the desired failsafe position; 3) Press briefly the F/S button of the receiver (less than 1 second), the transmitter module will make a long “beep” (for D8R only) or the GREEN LED of the receiver will flash twice, indicating the failsafe position has been set in the receiver. To disable the failsafe function, re-bind the receiver. Follow the steps below to set failsafe during flight: 1) Bind the receiver first and turn on both transmitter and receiver; 2) Enter MENU page, select F/S to enter failsafe sub-page, press button B to set failsafe at the desired failsafe position during flight. Note: If FrSky DHT-U, sensor hub, sensors and LCD-fdd_lite are applied, please upgrade your telemetry module and D8R receiver with FrSky newly-released ROMs, which can improve the reliability and stability of data feedback after the transmitter’s reset.

Products are shipped by the individual Fruugo retailers, who are located across Europe and the rest of the world. The delivery times and shipping prices vary depending on the retailer's location, the destination country and the selected delivery method.

Fruugo offers two delivery options: Standard or Express. All retailers offer a standard delivery service, and some retailers also offer an express delivery service.

Although Fruugo retailers endeavour to deliver within these timescales, please note that the above timescales are estimated and not guaranteed.

The delivery timescales do not include any customs clearing times beyond Fruugo's control.

Please allow additional shipping time for deliveries to exceptional locations that are hard to reach, and also during busy periods such as Christmas.

All carriers deliver during normal business working hours and may require a signature on receipt, so please ensure your order is delivered to an address where someone will be available to accept it.

We do our best to ensure that the products that you order are delivered to you in full and according to your specifications. However, should you receive an incomplete order, or items different from the ones you ordered, or there is some other reason why you are not satisfied with the order, you may return the order, or any products included in the order, and receive a full refund for the items.

Certain products purchased at Fruugo cannot be returned. They fall in the following categories:

Please take reasonable care of the goods whilst in your care. Any goods returned must be in a resaleable condition. They must be unworn/unused with original tags attached and in original packaging. It is your responsibility to ensure that the goods are appropriately packaged to ensure they are not damaged in return transit.

Notifying us of a return

If you wish to return an order, or some of the products included in an order, please notify Fruugo customer care within 14 days of receiving the goods, including the following information:

Our customer care will send you specific instructions on how to ship the return package(s) to the retailer(s). Please do not ship the return package before you receive the instructions.

Shipping products back to retailers

Goods must be returned without undue delay and in any event not later than 14 days after notifying us of your cancellation.

If you are returning products to several retailers, you should distribute the products accordingly and send the products to those retailers who shipped them to you initially. 

We strongly recommend that you use registered mail (and insure any high-value packages), since neither Fruugo nor the retailer take responsibility for shipments that are lost or damaged during return transportation.

Please ensure you retain a proof of postage receipt so in the unlikely event your parcel goes missing, you will have proof you sent it.


You will be refunded within 14 days of the retailer receiving back the goods. We will notify you by e-mail once the products reach the retailer and are accepted for return. Where a retailer has offered to collect the goods, you will be refunded within 14 days of cancelling your contract.

Unless a product or products you wish to return arrived to you damaged or faulty, you are responsible for the return transportation costs.

Providing you are returning all the products from a specific retailer, we will refund the standard shipping costs you paid for the original delivery. If you chose to pay for a non-standard delivery, we will only refund the cost of our least expensive, standard delivery. 

Damaged or faulty goods

If you receive a damaged, broken, or defective product, please notify Fruugo customer care as soon as possible. Include at least the following information:

We will generally instruct you to ship the damaged product back to the retailer. As soon as it reaches the retailer, they will send you a replacement product. If the replacement can't be made, or if you wish to cancel the order, you will be refunded in full. You will also be reimbursed for reasonable returns postage costs for damaged or faulty goods once we have received your postage receipt.

If the outer packaging of your order is clearly damaged on arrival, and you are suspecting that the products are damaged as well, you can either reject the delivery or accept the goods and sign for them as damaged. In both instances, please notify Fruugo customer care as soon as possible.

Refusing delivery

If you refuse to accept delivery of all or part of your order (where the products or packaging do not appear to be damaged or defective) you will be responsible for the postage charges. Any fees and charges incurred by the retailer due to a package being refused will be deducted from your merchandise refund.


More FrSky products