FrSky Futaba FASST yhteensopiva vastaanotin, TFR8-S 2015

R549.00 8 items in stock
  • Product reference: 4166406-9564058
  • Plane icon Dispatched within 24 hours
  • Shipping from Finland
  • Delivery cost to South Africa R130.42

1.TF Receivers Please note that there are many differences between other brand and FrSky, especially in the binding procedure and failsafe setting. Read the instruction manual carefully and set up devices as described below. 1.1 Compatibility: FASST 2.4G: Air Systems (7CH Mode/Multi Mode) & Surface Systems (C1 Mode) FrSky TF Modules: TF-8M, TF-14M 1.2 Specifications: Number of Channels: 8 Operating Voltage Range: 3.5V~10V Dimension: 54*30*15mm Weight: 14.9g Latency: 14ms (FS)                7ms (HS) 1.3 Features: 1) Compatible with Futaba FASST 2.4GHz systems, including ground systems (such as 3PK, 4PK) 2) Parallel with TFR8/TFR8-S to become a 14 channel FASST compatible receiver 3) Improve capability of anti-interference 4) Firmware upgradable 2. Setup 2.1 Bind procedure: Turn on the transmitter, connect the battery to the receiver while pressing receiver’s F/S button. After the RED LED is off and GREEN LED is solid, the binding process is completed and the receiver is operating normally. 2.2 Setting failsafe: TF series receivers support failsafe function for all channels. Follow the steps below to set failsafe: 1) Bind the receiver first, and disable failsafe on the transmitter side; 2) Set all transmitter controls to the desired failsafe position; 3) Press briefly the F/S button of the receiver, the GREEN LED of the receiver will flash twice, indicating the failsafe is set up successfully. If you do not need the failsafe function any more, just re-bind the receiver to set default failsafe mode. Warning: Some transmitter manufacturers use a failsafe method that can interfere with that used by FrSky. Be sure to disable any transmitter failsafe settings before setting FrSky failsafe positions. Unusual jitter may result otherwise. 2.3 LED status: RED LED GREEN LED Mode Off On Normal mode On On Waiting to be bound Flashing On Signal lost On Flashing  twice Set failsafe Flashing slowly On FS mode Flashing  fast On HS mode 3. How to switch between two PPM modes Turn the transmitter off, connect the battery to the receiver, press the F/S button of receiver for 6 seconds and then release. The red LED will flash fast in HS Mode and slowly in FS Mode.Repeat this to alternate modes. Warning: HS Mode is only applied for high-speed digital servos. Other servos should select FS Mode, otherwise servos will get heat or even burn out. 4.Solution for Multi-channel receiver TFR8-S can parallel with TFR8/TFR8-S to become a multi-channel FASST compatible receiver. Follow the steps below: 1) Bind both receivers to the transmitter/transmitter module first; 2) Connect CH1 & CH2 of TFR8-S by a jumper, then CH3 will be shifted to CH9, CH4 will be shifted to CH10, and so forth; 3) The two receivers can be placed in different areas of the module.

Products are shipped by the individual Fruugo retailers, who are located across Europe and the rest of the world. The delivery times and shipping prices vary depending on the retailer's location, the destination country and the selected delivery method.

Fruugo offers two delivery options: Standard or Express. All retailers offer a standard delivery service, and some retailers also offer an express delivery service.

Although Fruugo retailers endeavour to deliver within these timescales, please note that the above timescales are estimated and not guaranteed.

The delivery timescales do not include any customs clearing times beyond Fruugo's control.

Please allow additional shipping time for deliveries to South Africa.

All carriers deliver during normal business working hours and may require a signature on receipt, so please ensure your order is delivered to an address where someone will be available to accept it.

We do our best to ensure that the products that you order are delivered to you in full and according to your specifications. However, should you receive an incomplete order, or items different from the ones you ordered, or there is some other reason why you are not satisfied with the order, you may return the order, or any products included in the order, and receive a full refund for the items.

Certain products purchased at Fruugo cannot be returned. They fall in the following categories:

Please take reasonable care of the goods whilst in your care. Any goods returned must be in a resaleable condition. They must be unworn/unused with original tags attached and in original packaging. It is your responsibility to ensure that the goods are appropriately packaged to ensure they are not damaged in return transit.

Notifying us of a return

If you wish to return an order, or some of the products included in an order, please notify Fruugo customer care within 14 days of receiving the goods, including the following information:

Our customer care will send you specific instructions on how to ship the return package(s) to the retailer(s). Please do not ship the return package before you receive the instructions.

Shipping products back to retailers

Goods must be returned without undue delay and in any event not later than 14 days after notifying us of your cancellation.

If you are returning products to several retailers, you should distribute the products accordingly and send the products to those retailers who shipped them to you initially. 

We strongly recommend that you use registered mail (and insure any high-value packages), since neither Fruugo nor the retailer take responsibility for shipments that are lost or damaged during return transportation.

Please ensure you retain a proof of postage receipt so in the unlikely event your parcel goes missing, you will have proof you sent it.


You will be refunded within 14 days of the retailer receiving back the goods. We will notify you by e-mail once the products reach the retailer and are accepted for return. Where a retailer has offered to collect the goods, you will be refunded within 14 days of cancelling your contract.

Unless a product or products you wish to return arrived to you damaged or faulty, you are responsible for the return transportation costs.

Providing you are returning all the products from a specific retailer, we will refund the standard shipping costs you paid for the original delivery. If you chose to pay for a non-standard delivery, we will only refund the cost of our least expensive, standard delivery. 

Damaged or faulty goods

If you receive a damaged, broken, or defective product, please notify Fruugo customer care as soon as possible. Include at least the following information:

We will generally instruct you to ship the damaged product back to the retailer. As soon as it reaches the retailer, they will send you a replacement product. If the replacement can't be made, or if you wish to cancel the order, you will be refunded in full. You will also be reimbursed for reasonable returns postage costs for damaged or faulty goods once we have received your postage receipt.

If the outer packaging of your order is clearly damaged on arrival, and you are suspecting that the products are damaged as well, you can either reject the delivery or accept the goods and sign for them as damaged. In both instances, please notify Fruugo customer care as soon as possible.

Refusing delivery

If you refuse to accept delivery of all or part of your order (where the products or packaging do not appear to be damaged or defective) you will be responsible for the postage charges. Any fees and charges incurred by the retailer due to a package being refused will be deducted from your merchandise refund.


More FrSky products