1、The mini motor adopts all‑metal gears, which is wear‑resistant and runs smoothly and without noise 2、The use of copper coil and deceleration resistor, the conductivity is strengthened, and the motor torsion is increased. 3、The micro motor is a permanent magnet AC synchronous motor, which improves the reliability of motor operation. 4、Using high-quality magnetic tiles to work, higher efficiency and less dynamic loss. 5、Widely used in micro-machines in various industries, such as household appliances, CNC machine tools, electronic manufacturing equipment, etc. Item Type: Gear Motor Model: XD-60KTYZ Material: Copper Output Shaft Size: Approx. 7 x 19mm / 0.3 x 0.7in Protection Level: IP20 Insulation Resistance: After the rated operation of the motor under normal temperature and humidity, when measuring the insulation resistance between the coil and the motor shell with a DC500V resistance meter, it does not exceed 20MΩ Insulation Withstand Voltage: After the rated operation of the motor under normal temperature and humidity, apply 50Hz or 60Hz between the coil shells for one second at a voltage of 1800V without abnormality. Temperature Rise: When the gearbox or equivalent heat sink is installed, and the rated operation is performed under normal temperature and humidity, it is normal to measure the temperature rise of the coil by the resistance method to 75-80℃. Insulation Class: E class (130℃) Operating Environment Temperature: Motor: -10~+40℃ (no icing) Use Environment Humidity: 85% or less (no condensation) Whether Support CW and CCW: Yes Whether Support Speed Regulation: No Model Voltage (V) Speed (rpm/min) Normal Torsion (kgf·cm) Long Time Work Large Torsion (kgf·cm) Intermittent Work Power (W) XD60KTYZ AC220V 20 12 17 14 30 5 10 14 50 2.5 5 14 80 1.7 3 14 AC110V 20 12 17 14 30 5 10 14 50 2.5 5 14 80 1.7 3 14 1 x Gear Motor