Hand Held Bee Tools Honey Refractometer 58-92% Sugar Content Beekeeping Refractometer Honey Concentration Meter

Hand Held Bee Tools Honey Refractometer 58-92% Sugar Content Beekeeping Refractometer Honey Concentration MeterName:Test Optical 58-92% Brix Honey Sugar Meter Saccharimeter.The main purpose.Honey concentration meter,specifically detect a number of indicators of honey.The main technical parameters.1.Measuring range:.58-92%(sugar content)of 1%.13-27%(water content)of 1%.38-43oBe 39;(Baume)0.5 Be 39;.2.With temperature compensation function,make the data more accurate. Measurement Procedures.1,the alignment of the light refraction prism(1)direction,adjust the eyepiece diopter ring(5),until the reticle clear.2,adjusting the reference:first the standard solution before measurement(silicone oil),based on the same equipment and test liquid temperature.Open the cover(2),then take 1 to 2 drops of standard liquid droplets on the refractive prism,and press with the test piece in the lens(2)draw a dividing line between light and shade.Rotational alignment screws(3)so that the eyepiece of light and shade boundary was adjusted to coincide with the horizontal line above 78.8%.3.Measure:open the cover(2),use a soft cloth to wipe the prism surface,take 1 to 2 drops of the test solution was dropped on the refractive prism(2)Close the lid and gently press,Close the daylight plate so the test solution spreads across the entire surface of the prism without air bubbles or dry spots.read the relative scale of blue and white dividing line,that is,the concentration of the measured liquid content.4,after the measurement is completed,the direct use damp cloth to wipe the surface of the prism and attachments on the cover,to be dried and properly stored. Accessory.Comes with:Manual 1,a screwdriver,a pipette,a lens cloth. Precautions. 1.Accurate measurement depends on careful calibration.The prism and sample must be at the same temperature for accurate results.2.Do not expose the instrument to damp working conditions,and do not immerse the instrument in water.If the instrument becomes foggy,water has enter the body.Call a qualified service technician or contact your dealer.3.Do not measure abrasive or corrosive chemicals with this instrument.They can damage the prism 39;s coating.4.Clean the instrument between each measurement using a soft,damp cloth.Failure to clean the prism on a regular basis will lead to inaccurate results and damage to the prism 39;s coating.5.This is an optical instrument,It requires careful handling and storage.Failur to do so can result in damage to the optical components and its basic structure.With care,this instrument will provide years of reliable service.