Indoor Motion Detector, Flush and Surface Mounted, Programmable, Infrared Sensor, 8m / 360, Suitable LED, Max.

Motion detector suitable for indoors for recessed and surface mounting on the ceiling, dimensions Ø79x40mm. This motion detector can be installed in the ceiling (recessed) or directly against the ceiling at using a screw adapter (projecting). The motion detector has a maximum consumption of 800W for incandescent lamps and 400W for LED lamps or other energy-saving bulbs. The area covered by this infrared sensor is 8m with an angle of 360°. Its operating cycle is from 10 seconds to 30 minutes. The recessed motion detector can also be adjusted according to the ambient light (between 3 and 2000 lux in the covered area). infrared for ceiling mounting indoors Detection range up to 8m, detection angle 360° After a preset time of approx. 10 seconds and 30 minutes, the motion detector switches off again. Using a regulator, it is also possible to adjust the trigger sensitivity of the device according to the ambient light (between 3-2000 lux in the covered area). Maximum consumption : 800W for incandescent lamps / 400W for LED lamps or other energy saving bulbs Housing material: Plastic Ingress protection: IP20 Recessed Indoor Motion Detector Ceiling Mount Programmable LED Infrared Sensor Suitable for recessed and surface mounting This motion detector can be installed in the ceiling (recessed) or directly against the ceiling using a screw adapter (surface-mounted) Adjustment possibilities of the IR sensor Recessed indoor motion detector Mounting on the Programmable Ceiling LED Infrared Sensor Recessed LED Indoor Motion Detector Suitable Wall Mount IR Sensor Range 9m/160° Detection Field The Infrared Sensor detects movement in an area of ​​up to 8m for a 360° coverage angle and turns on the lighting device. Operating cycle How long your devices should the lights stay on? The duration of the operating cycle can also be set, either continuously or with fixed delays. As soon as the sensor detects new movements, the operating cycle restarts from zero. Ambient brightness Your lamps should only light up at night? No problem, you can decide whether the sensor triggers your lighting during the day or at night. The sensor can either be adjusted continuously depending on the ambient light or during the day or night.