Product Name: Pipeline Dredging Agent Capacity: 260g Quickly breaks down blockages – efficiently dissolves oils, food residues, and hair, restoring smooth drainage. Deep cleaning and maintenance – clears clogs and removes buildup on pipe walls to help prevent future blockages. Safe and environmentally friendly formula – does not contain strong corrosive ingredients, is safe for pipes, and is suitable for regular household use. Easy and convenient to use – simply pour into the drain, let it sit, then rinse with water. No need to disassemble pipes or use special tools. Long-lasting fresh scent – leaves a mild, fresh fragrance after use, helps eliminate kitchen odors, and keeps the air cleaner. Usage: For basins, vegetable sinks, floor drains (kitchen, shower rooms, etc.): Remove standing water near the drain opening. If a hose is present, disconnect the interface and apply directly to the main pipe. If not, reduce the amount and use in smaller, repeated applications. Pour approximately 50g (about 2 level bottle caps) directly into the drain. Add a second cap every 1–3 minutes if needed. Wait 1–2 minutes, then flush with warm water. For tough oil clogs, hot water is recommended to enhance performance. Maintain a safe distance of over 60cm when pouring water. Wait 10 minutes to check results. If no hot water is used, wait 60 minutes. Repeat if necessary. For toilets and squatting pans: Remove excess water above normal levels. Pour 100g (about 4 level bottle caps) into the bowl and add hot water. For severe oil clogs, use water above 50°C to improve effectiveness. Wait 10 minutes and check results. If no additional hot water is added, wait 1 hour. If clog remains, repeat the process. Use with a plunger if needed, as the blockage may be dissolved but require slight pressure to clear. For main pipeline cleaning: Remove standing water from the drain opening. Pour 100g (about 4 level bottle caps) into the pipe and add hot water. Let it react and dissolve buildup. For heavy oil clogs, water above 50°C is recommended. After 1–2 hours, flush thoroughly with water. Repeat if needed. Maintenance and deodorizing (helps reduce bacteria and odors): Pour about 50g (about 2 level caps) into the drain, add water, let sit for 10 minutes, then rinse thoroughly.