Welcome to our shop! This Capacitive Touch LED Dimmer is a versatile and convenient tool for controlling the brightness of your LED lights. It features a wide selection range and simple operation, allowing you to adjust the brightness as needed. With its touch function, you can easily control the dimmer even when it is protected by a medium such as glass, acrylic, plastic, ceramics, etc. The touch sensitivity and reliability are not affected by power interference or mobile phone interference, making it highly reliable. Installation is hassle-free, as you don't need to directly contact the copper foil. Simply dim the lights through acrylic glass or plastic of 3mm or more. This Capacitive Touch LED Dimmer can be used to control various LED modules, light strips, indoor table lamps, DIY lamps, and more. It has a maximum output current of 500mA and operates at a voltage range of 2.4-5V. Here are the key specifications: - Item Type: Capacitive Touch LED Dimmer - Voltage: 2.4-5V - Maximum Output Current: 500mA - PCB Size: 33x20mm / 1.3x0.79in - Pitch: 16mm / 0.63in - Hole Diameter: 2.5mm / 0.1in Instructions for use: a) Short Touch: By touching the dimmer for less than 550ms, you can achieve ON/OFF control of the light. The initial brightness is fixed at 90% of full brightness. b) Long Touch: By touching the dimmer for more than 550ms, you can achieve stepless brightness adjustment. When touched for a long time, the brightness gradually increases. If the touch time exceeds 3 seconds, the brightness does not change after reaching maximum brightness. To decrease the brightness, touch the dimmer again for a long time. If the touch time exceeds 3 seconds, the brightness does not change after reaching minimum brightness. 100% Satisfaction: Our customers are our top priority. If you find any product problems after receiving the goods, such as damage and incorrect quantity of goods, please contact the seller immediately. We try our best to provide you with satisfactory after-sales service.