Waterproof Outdoor Motion Detector Automatic Infrared Sensor. Features: 1. Easy to Install. 2. Automatic Convenient Safe and Practical. 3. It Has the Function of Power and Detection Indication. 4. The Motion Sensor Can Identify Day and Night Automatically. 5. It Has Wide Detection Range Made Up of Up and Down Left and Right Service Field. 6. This Product is a New Type of Energy-saving Lighting Switch It Adopts High Sensitivity Detector Integrate Circuit. 7. It Utilizes Human Motion Infrared Rays As Control Signal Sources when One Enters the Detection Field It Will Start the Controlled Load at Once. Delivery Quantity: 1 Piece Product color: black Product Features: 1. LUX Is to regulate day or night work. A: When adjusted to the sun position, the sensor works all day; B: When adjusted to the moon position, the sensor does not work during the day, and automatically enters the working state at night. 2. TIME Is to adjust the sensor delay time (52sec~61min) The delay time refers to the delay time for the sensor to turn off after the sensor detects a person and the person leaves the sensing area. 3. SENS is to adjust the sensitivity of the sensor. Generally no adjustment is required. If the induction is too strong and the light is always on, the sensitivity can be adjusted to the minimum position. The main technical parameters: Detection range: 180 Detection distance: maximum 12m (25) Working voltage: DC24V Operating temperature: 10 ~ +40 Working humidity: less than 93% RH Delay time: 5 seconds ~ 6 minutes (adjustable) Ambient illumination: 2 ~ 2000LUX (adjustable) Installation height: 1.8m ~ 2.5m Material: ABS Dimensions: 60*45*160mm Installation method: open type, (opening 16mm) when installing, the adjusting button faces downward. Wiring Instructions: N-Blue (connected to zero line) L-brown (connect the live wire) Output - red (sensor output line) Blue and Brown Input Power Blue and red are connected to the load (lamp).